As the 30mm wide Zippy lipos (450, 600mAh) wont fits into the stock Walkera 4G6 landing gear i have removed the battery holder from and cut the LG in the middle of the front mounting. Drilled a second whole and used a longer screw to mount it.
Now the distance between the struts big enough for 30mm Zippys. Lipo is held by a rubber band. Maybe not the most elegant solution, but less weight than any other landing gear. Stabilty of the LG is still strong.
When using the metal bladegrips you will need spacers in order to have the ball links exactly in the center over the flybar.
I took some M1 hexnuts, drilled them to 1.5mm inner diameter and used them as spacers. they are about 0.7mm thick, this is perfect for my setup. What kind of spacer thickness to use depends on how tight your bladegrips are on the feathering shaft, the space between rotorhead and bladegrips. 0.7mm spacers should be perfect for the stock setup. If you use the plastic bladegrips the bosses have to be trimmed down a bit.
The video shows how to check if you have the correct spacers. Notice that the ball links line up almost perfectly in the video. If they are not in line you will get friction and vibrations in the rotorhead.
The stock Walkera 4G6 mixer arms have way too much play, also no ball bearing. So i took some aluminum mixer arms from the Gaui EP100 V2 aka Minizoom Pro V2, part 203580 (silver) or part 203640 (black). The original ball links can be removed and the Walkera ball links fit into the threads in the Gaui parts. The Gaui parts work with the plastic Walkera bladegrips, if you use the metal bladegrips some spacers are necessary. The Gaui arms are a bit shorter but that doesnt seem to change the feel.
Result: The heli feels much more precise and most unexpected pitch-jumps are gone. Still have to shorten the plasic on the bladeholders where the screw goes in.
Thanks to Don on RCGroups – i first saw the mod from him.
Here is a video from RCGroups user jaguar_5, showing the difference:
Recent Comments