Gaui mixerarms on the Walkera 4G6 – correct setup
There have been questions about how to set up the Gaui mixerarms on the Walkera 4G6 heli correctly.
When using the metal bladegrips you will need spacers in order to have the ball links exactly in the center over the flybar.
I took some M1 hexnuts, drilled them to 1.5mm inner diameter and used them as spacers. they are about 0.7mm thick, this is perfect for my setup. What kind of spacer thickness to use depends on how tight your bladegrips are on the feathering shaft, the space between rotorhead and bladegrips. 0.7mm spacers should be perfect for the stock setup. If you use the plastic bladegrips the bosses have to be trimmed down a bit.
The video shows how to check if you have the correct spacers. Notice that the ball links line up almost perfectly in the video. If they are not in line you will get friction and vibrations in the rotorhead.
Image below shows all the detail to look for.
Gaui Mixerarms on the Walkera 4G6 - correct setup
