Rob's Hangar

Here is my Walkera 4G6 landing gear. Hybrid design made from parts of the original 4G6 gear and an old HM52#1 gear (see my older post here), held together by shrink tube and ca. The 4G6 gear is super lightweight and unbrakable and the HM52#1 mounting provides a wider spread so the heli has more stability on the ground and during landings. Total weight incl. screws is 2.2gm only, so its weight is even less then the original Walkera 4G6 LG (2.4gm).

Hybrid 4G6 / HM52 landing gear on the 4G6 - sideview

Hybrid 4G6 / HM52 landing gear on the 4G6 - mounting

Hybrid 4G6 / HM52 landing gear on the 4G6

only 2.22gm 4G6 / HM52 landing gear

Put the HM52#1 landing gear (HM52#1-Z20) under the 4G6. The holes in the HM52 skids fit the front mounting holes of the 4G6 frame. Tailstruts can also be mounted without modification. HM52 alloy skids have been shortened.

UPDATE: Weight incl. screws and spacers 3,9gm. 1,5gm more than original LG  (2,4gm).

3.91gm: HM 52#1 landing gear for 4G6

4G6 with HM52# landing gear

4G6 with HM52# landing gear

4G6 with HM52# landing gear

4G6 with HM52# landing gear