Rob's Hangar

Here is my version of a 16″ (40cm) flying wing design based on a plan by Bob Skinner on RCGroups. Here it is flying at windspeeds of about 50Kmh (30mph).

Specs:
Wingspan: 16″ (40cm)
AUW: 103g (3.6oz)
Lipo: 850mAh 20C Zippy 1S
RX: Gyroless Walkera 2609 2.3g
Motor: HP08S outrunner 11,000(?) KV
ESC: Walkera 10A
Prop: HK 3×2″
Max. static RPM: ~28000
Max. static thrust: ~120g (4.2oz)
Pitchspeed: 85Kmh (53mph)
Servos: Walkera 3.7g WK-02-1
TX: Walkera 2801Pro, delta wing setup

With the winglets it flies like on rails, i like it much better than without them. I see some potential to make the winglets even smaller while keeping enough stabilization.